H2xU9T-Nx Industrial Motion Controller RFQ Form

Knob Options:
F-Series Ananlog
if you have chosen an  Industrial Mouse™ please choose a joystick knob
N5 N2 N24 N54 N3 N33 N63 N34 N82 N84

Does your Application require an extra switchpad?
No 1-Button
1-Button Switchpad 3-Button
3-Button Switchpad 6-Button
6-Button Switchpad Other:

Desired Number of Axes of Movement?
Single Axis Dual Axes Three(3) Axes Six (6) Axes Other:

Hardware Interface:
Computer Embedded Processor PLC Other:
if you chose Computer please select an Operating System, if not leave blank
Operating System:
Windows Solaris Unix Real-Time Other:

Digital Communication Interface*:
USB RS-232 RS-422 RS-485 Quadrature Other:

Operating Temperature
(-40°C to 0°C) (0°C to +40°C) (+40°C to +80°C) Other:

Hazardous Substances
Yes No
If Yes, check all that apply.

Will the Industrial Motion Controller be subjected to Vibration/Movement:
Mobile applications subject pointing devices to high vibrations such as airplanes, helicopters, marine vessels, trucks, etc.
Yes No Not Sure

Operation:

Ex. 1) The pointing device will be used to outline anatomical images from medical x-ray scans in a hospital.
Ex. 2) The pointing device will be used as a mouse cursor control for sizing targets onboard a Marine vessel.

Does your application require Conformal Coating on PCB? Yes No
Conformal Coating on the PCB protects electrical components from moisture and prolongs life. Conformal
Coating is used when the environment may contain moisture caused by either condensation from high
humidity or rapid changes in temperature.

Does your application require a Deadband? Yes No
Typically most Analog applications will require the use of a Deadband, whereas digital applications require a
joystick without a Deadband.
When a joystick has a Deadband of 2 degrees about center the output voltage will remain constant with a
slight movement off center.
When a joystick is without a Deadband, the output voltage will change with the slightest movement off center.

Does your application require an Optical Neutral "Safety" Switch? Yes No
CTI's patented Optical Neutral Switch is a "circuit safety or operations normal" signal, the mechanical equivalent
of a deadman switch, for your application. This optical indicator is a totally separate, independent and
complementary signal from the Vx, Vy, and Vz output signals, which indicates that the joystick is either on or
off center. Note: This feature is only available with the +5V, ±5V or USB models.
Ex 1: Analog +5V or ±5V Input Signals, 0V output on center, +5V output off center
Ex 2: Digital USB (+5V) Input, Logic Level "0" on center, Logic Level "1" off center

Additional Information

Case Sensitive CAPTCHA